NiCOR

LOW ALLOYED WELDING WIRES

SFA-AWS A5.28 ER80S-G
EN ISO 14341-A- ~ G3Ni1
Average Chemical analysis
C% Si% Mn% P% S% Cu% Cr% Ni% Mo% Al% V% Zr+Ti%
0,090 0,80 1,50 < 0,020 < 0,020 < 0,40 < 0,30 0,90 < 0,050 < 0,020 < 0,030 < 0,15
The copper value include the surface coating
Typical mechanical properties of all-weld metal
Rm Rs Al Kv
N/mm² N/mm² %5d -40°C
650 560 24 60 J
The mechanical properties are approximate and may range on the basis of the Heat, shielding gas, welding parameters and other factors
Welding process
Protection MIG: EN ISO 14175 C1, M20, M21, M33 and similar / TIG: I1 (Argon)
Current and polarity MIG: DC+ / TIG: DC-
Welding positions EN ISO 6947: PA, PB, PC, PD, PE, PF, PG
Post Welding Heat Treatment as welded
Dimensions
MIG (mm) 0,60 - 0,80 - 0,90 - 1,00 - 1,14 - 1,20 - 1,40 - 1,60
TIG (mm) 1,00 - 1,20 - 1,60 - 2,00 - 2,40 - 3,00 - 3,20 - 4,00
Base materials to be welded S235JRW, S355J2G1W, 9CrNiCuP3-2-4 ; Resco, Patinax, ;A242:1-2, SEW 087, 11MnNi53, 13MnNi63, Corten A-B1, Itacor, Resista, ; WTSt52.3, TStE255 - TStE380, StE255-StE380, TTSt35-TTSt45
Applications

Good mechanical properties and resistance to atmospherical agents. Suitable for handling machines, boilers, building structures, petrolchemical sector, gas pipelines etc.

Approvals Contact ITALFIL
CANCEL