650

WELDING WIRES FOR HARDFACING

Werkstoff 1.2606
DIN 8555 MSG/WSG 3-GZ-60T
Average Chemical analysis
C% Si% Mn% P% S% Cu% Cr% Mo% V% W%
0,35 1,00 0,50 < 0,025 < 0,020 < 0,25 5,30 1,40 0,30 1,30
The copper value include the surface coating
Typical mechanical properties of all-weld metal
Hardness Hardness
HB HRC
558 - 620 57 - 60
The mechanical properties are approximate and may range on the basis of the Heat, shielding gas, welding parameters and other factors
Welding process
Protection MIG: M21 Mixture and similar / TIG: I1 (Argon)
Current and polarity MIG: DC+ / TIG: DC-
Pre Heating temperature 300° C
Dimensions
MIG (mm) 0,80 - 0,90 - 1,00 - 1,14 - 1,20 - 1,40 - 1,60
TIG (mm) 1,20 - 1,60 - 2,00 - 2,40 - 3,00 - 3,20 - 4,00
Base materials to be welded X35CrWMoV5 ; H12 ; X35CrWMoV5 ; BH 12 ; SCPH 62 ; STD 62
Applications

Martensite steel, used on materials resistant to moderate impacts and abrasion. Used in particular to repair mandrels, punches, dies, cylinder crusher, screws, hammers, hot and cold shear blades, pneumatic hammers, burring tools, etc.

Approvals Contact ITALFIL
CANCEL