8405
WELDING WIRES FOR HARDFACINGWerkstoff 1.8405
EN 14700 S Fe2
DIN 8555 MSG/WSG 2-GZ-350
Average Chemical analysis
| C% | Si% | Mn% | P% | S% | Cu% | Cr% | Ni% | Al% | Ti% |
|---|---|---|---|---|---|---|---|---|---|
| 0.70 | 0.45 | 1.90 | <0.025 | <0.020 | <0.25 | 1.00 | <0.15 | 0.10 | 0.20 |
The copper value include the surface coating
Typical mechanical properties of all-weld metal
| Hardness | Hardness |
|---|---|
| HB | HRC |
| 325-375 | 36 |
The mechanical properties are approximate and may range on the basis of the Heat, shielding gas, welding parameters and other factors
Welding process
| Protection | MIG: M21 Mixture and similar / TIG: I1 (Argon) |
| Current and polarity | MIG: DC+ / TIG: DC |
| Welding positions | EN ISO 6947: PA, PB, PC, PD, PE, PF, PG |
Dimensions
| MIG (mm) | 1,20 - 1,40 - 1,60 |
| TIG (mm) | 1,20 - 1,60 - 2,00 - 2,40 - 3,00 - 3,20 - 4,00 |
| Base materials to be welded | |
| Applications | For medium-hard wear-resistant deposit on wear parts under pressure, impact abrasive stress. Finishing by grinding is possible. Application with dies, bottom dies, striking tools, crawler running gear parts, etc. |
| Approvals | Contact ITALFIL |
