RC2
WELDING WIRES FOR HARDFACINGWerkstoff ~ 1.2367
DIN 8555 MSG/WSG 3-GZ-50ST
Average Chemical analysis
| C% | Si% | Mn% | P% | S% | Cu% | Cr% | Ni% | Mo% | Ti% |
|---|---|---|---|---|---|---|---|---|---|
| 0,26 | 0,50 | 0,70 | < 0,030 | < 0,020 | < 0,35 | 5,20 | < 0,20 | 3,80 | 0,70 |
The copper value include the surface coating
Typical mechanical properties of all-weld metal
| Hardness | Hardness |
|---|---|
| HB | HRC |
| 430 - 485 | 45 - 50 |
The mechanical properties are approximate and may range on the basis of the Heat, shielding gas, welding parameters and other factors
Welding process
| Protection | MIG: M21 Mixture and similar / TIG: I1 (Argon) |
| Current and polarity | MIG: DC+ / TIG: DC- |
| Pre Heating temperature | 370° C |
Dimensions
| MIG (mm) | 0,80 - 0,90 - 1,00 - 1,14 - 1,20 - 1,40 - 1,60 |
| TIG (mm) | 1,20 - 1,60 - 2,00 - 2,40 - 3,00 - 3,20 - 4,00 |
| Base materials to be welded | Z38CDV5-3 ; X38CrMoV5-3 |
| Applications | Used on Cr-Mo and Ni-Cr-Mo alloyed materials when hardness, resistance to heat on parts subject to friction, compression and good impact strength at high temperature are required. Repairing and/or restoration of cylinders, conveyor and guide rollers, shear blades, forging, punches, percussion hammers, hot and cold working tools of middle hardness. |
| Approvals | Contact ITALFIL |
