600
WELDING WIRES FOR HARDFACING
Werkstoff 1.4718
DIN 8555 MSG/WSG 6-GZ-60
EN 14700 S Fe8
Average Chemical analysis
C% |
Si% |
Mn% |
P% |
S% | Cu% | Cr% | Ni% | Mo% | Al% | V% | W% | Nb% | Ti% |
0,45 |
3,00 | 0,40 |
< 0,025 | < 0,020 |
< 0,25 | 9,30 |
< 0,15 | < 0.15 |
< 0,030 | < 0,030 |
< 0.10 |
< 0.050 |
< 0.050 |
The copper value include the surface coating
Typical mechanical properties of all-weld metal
Hardness | Hardness |
HB | HRC |
550 - 620 | 55 - 60 |
The mechanical properties are approximate and may range on the basis of the Heat, shielding gas, welding parameters and other factors
Welding process
Protection |
MIG: M21 Mixture and similar / TIG: I1 (Argon) |
Current and polarity |
MIG: DC+ / TIG: DC- |
Pre Heating temperature |
250° C |
Dimensions
MIG (mm) |
0,80 - 0,90 - 1,00 - 1,14 - 1,20 - 1,40 - 1,60 |
TIG (mm) |
1,20 - 1,60 - 2,00 - 2,40 - 3,00 - 3,20 - 4,00 |
Base materials to be welded |
X45CrSi9-3 ; 4Xr9Si2 ; X45CrSi8 ; HNV1; HNV2, SUH11 ; X45CrSi 9-3 ; 401 S45 ; SUH 1 ; STR 1 ; 40Ch9S2 |
Applications |
For surfaces where it is required a fairly good impact strength and a good resistance to shocks; martensitic steel. Excavators, mining industry, cylinder crushers hammers, pneumatic hammers, knives, cutting and cold working tools, crumbling jaws, anvils, catepillars, screws, guide rollers, etc. |
Approvals |
Contact ITALFIL |