T1S
LOW ALLOYED WELDING WIRES
SFA-AWS A5.28 ER110S-G
EN ISO 16834-A- G 69 4 M21 Mn3Ni1CrMo
EN ISO 16834-A- Mn3Ni1CrMo
Average Chemical analysis
C% |
Si% |
Mn% |
P% |
S% | Cu% | Cr% | Ni% | Mo% | Al% | V% | Ti% | Zr% |
0,080 |
0,60 | 1,60 |
< 0,015 | < 0,015 |
< 0,25 | 0,30 |
1,50 | 0,30 |
< 0,030 | 0,10 |
< 0,050 |
< 0,050 |
The copper value include the surface coating
Typical mechanical properties of all-weld metal
Rm |
Rs |
Al |
Kv |
N/mm² |
N/mm² |
%5d |
-40°C |
800 |
750 | 19 |
70 J |
The mechanical properties are approximate and may range on the basis of the Heat, shielding gas, welding parameters and other factors
Welding process
Protection |
MIG: EN ISO 14175 C1, M20, M21, M33 and similar / TIG: I1 (Argon) |
Current and polarity |
MIG: DC+ / TIG: DC- |
Welding positions |
EN ISO 6947: PA, PB, PC, PD, PE, PF, PG |
Interpass temperature |
120 - 180 ° C |
Post Welding Heat Treatment |
as welded |
Dimensions
MIG (mm) |
0,60 - 0,80 - 0,90 - 1,00 - 1,14 - 1,20 - 1,40 - 1,60 |
TIG (mm) |
1,00 - 1,20 - 1,60 - 2,00 - 2,40 - 3,00 - 3,20 - 4,00 |
Base materials to be welded |
T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc. |
Applications |
Copper coated low-alloy wire with Ni-CrMo suitable for single pass or multipass welding of low-alloy steels. It can be used also when good toughness characteristics in low temperature are requide. |
Approvals |
Contact ITALFIL |